annex radio

[coolj]

The annex_radio is a simple webradio without a display but easy to built.

All you need:
[Local Link Removed for Guests]

solder that things together like this:

[Local Link Removed for Guests]
[Local Link Removed for Guests]
[Local Link Removed for Guests]
[Local Link Removed for Guests]
[Local Link Removed for Guests]

[coolj]

this is the code:
[Local Link Removed for Guests]

[coolj]

the Webpage:

[Local Link Removed for Guests]

[coolj]

the config-page and the advanced-settings:
[Local Link Removed for Guests]
[Local Link Removed for Guests]

[coolj]

i replaced the board in this usb-speaker:

IMG_9832.jpeg

[coolj]

tip1 -> do not connect the 3.3V from the ESP-board to the sd-pin on the amp-board
tip2 -> i use a double-side-glue-tape 1mm to bring a little gap between the two boards

[PeterN]

Cool!
I have just ordered such modules a day ago

Sehr nettes Projekt!

[coolj]

passt in fast jede alte Lautsprecherbox


have fun to build

[PeterN]

Looks like a homepod by Apple;-)

[coolj]

i forgot the description


1. you can control the radio direct by the encoder (Volume = turn left/right , skip = push the button)

2. you can control it to the webpage (also add your stations and save them)

3. the radio speaks to you -> on skip the next station

4. if you press and hold the button on poweron you get some info like ip-address and the rssi