One thing that I did wrong:
I only exchanged the IP in the browser, between different devices, also ESP32.
So update at least website, or new window.
This explains the thing with the green bar.
The connection to the browser is interrupted only by reboot from the ESP, I usually observe the serial, if possible
Ö, ü, ä, I will remove,
I don't know on a double comment:
'code 'explanation
I always try to comment a lot, after 5 years I don't know anything else
And then I comment on a command with a comment ...
And right, I always used an external editor for copy past,
I think that has brought problems
I thank everyone again
I have now tested other 1MB, it has nothing to do with the flash size, it was a wrong way,
Although the error was different with different flash sizes.
I used Dout 40MHz,
But there were only "non ascii" problems
Now I get a little work to format all ".bas" accordingly,
Now I'm up to 1.48 and I hope that the ESP8266 project will not be quiet, some KB code still has space for the new version.
I have successfully soldered this flash
w25q64fvssig , 20 pieces 8MB for € 6, are very compatible.
https://aliexpress.com/item/1005006131987936.html