https://www.aliexpress.com/item/1005004 ... 19cVJfcKA
This device appears to flash Annex32 successfully, but does not give any usable Flash Free file storage (see below).
I initially used the blue button to detect the device settings, which showed as a 40MHz C3
It appeared to flash without errors using the green button, and popped up the Success msg after (see below).
Device shows up in wifi SSID list, and allows connecting to Editor in browser, but fails to Save any script cos of having no Flash Free available.
File Manager shows 0 bytes FlashFree (see screendump at bottom).
Tried Format from Config menu, which seems to proceed without error, but still gives no Flash Free available (tried several times).
Tried re-flashing using different Modes in Advanced, but different modes all ignored.
Tried re-flashing using USB while holding flashing button, which again appears to complete with success, but still no FlashFree available.
Interpreter seems to flash ok cos it allows connecting to the Editor, but there seems to be a bug preventing the file system from being initialised.
The screen dumps below show the results of a blue button scan, and below that is the result after flashing with the green button.
C3 Pico flashing problems
-
Electroguard
- Posts: 921
- Joined: Mon Feb 08, 2021 6:22 pm
- Has thanked: 302 times
- Been thanked: 339 times
C3 Pico flashing problems
You do not have the required permissions to view the files attached to this post.