QIO psram boots....[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Dec 22, 2022 3:10 pm Could you test these versions for the esp32-s3?
This is with the PSRAM disabled Annex32S3_no_psram.bin
and this is with a QIO psram enabled Annex32S3_qio_psram.bin
Please report .
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x43c
load:0x403c9700,len:0xbec
load:0x403cc700,len:0x2a3c
SHA-256 comparison failed:
Calculated: dcde8d8a4817d9bf5d5d69a7247667264e4e10ac7493514868b61f5aa6146539
Expected: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
Attempting to boot anyway...
entry 0x403c98d8
Serial version
Annex initializing...
PSRAM enabled
BLE support enabled
module Type 0 Display 255 SD_Card 0
OK
No SD cards found. Reverts to FFAT
Annex32-S3 BLE CAN 1.48.31
(C) ciccioCB 2022
Personal use only, commercial use strictly prohibited
Chip revision 0 Freq 240
STARTING
Switched to AP Mode ESP7E:DF:A1:E0:75:78
IP address: 192.168.4.1