New version 1.48.2 to test before final release
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
New version 1.48.2 to test before final release
HI All,
this is a new release 1.48.2 that contains the following improvements / fixes listed below.
Please test it and let me know.
I plan to update the flasher online too as soon as I'll receive positive feedback.
Enjoy
cicciocb
Version 1.48.2
OnSerial2 command fixed
Wlog command
- fixed semicolon and comma behaviour
Restore command
- can restore the data from any line referred by a label
EXIT DO
- Fixed a problem causing errors
DO LOOP
- Fixed a problem causing "Return without gosub"
Neopixels
- Implemented more command/ functions
- NEO.ROTATELEFT, NEO.ROTATELEFT, NEO.SHIFTLEFT, NEO.SHIFTRIGHT, NEO.REFRESH
- NEO.DIM, NEO.LIGHTEN, NEO.DARKEN, NEO.LINEARBLEND, NEO.BILINEARBLEND
Neoscroll
- Code completly rewritten to support many functionalities such as
- Based on a canvas
- Import of external fonts (same as for the TFT)
- Import of images / sprites
- Many new commands / functions implemented
ILI7789 TFT
- Implemented the support (5 settings)
SSD1351 OLED
- Implemented the support
Editor Page
- Fixed a problem on the URL of the help page
Fileman Page
- Improved the upload of the files with a upload status window
- Implemented the download of the module content in .zip format
FILE command
- Implemented the function FILE.FROMBASE64 to convert from base64 format
SPI bus
- Fixed the frequency and the format during the IOBUFFER functions
PEEK and POKE
- Implemented the functions / commands
- BAS.PEEK, BAS.PEEK8, BAS.PEEK16
- BAS.POKE, BAS.POKE8, BAS.POKE16
MQTT
- Implemented the command LWT (Last Will and Testament)
OLED
- Implemented the command OLED.BMP to read BMP b&w images
Sound output using internal DAC
- Fixed
DHT22 not working
- Fixed
IP shown on the QRCODE
- Fixed
Online Help 1.48.2 updated
Speed increase : the code has been optimized again
this is a new release 1.48.2 that contains the following improvements / fixes listed below.
Please test it and let me know.
I plan to update the flasher online too as soon as I'll receive positive feedback.
Enjoy
cicciocb
Version 1.48.2
OnSerial2 command fixed
Wlog command
- fixed semicolon and comma behaviour
Restore command
- can restore the data from any line referred by a label
EXIT DO
- Fixed a problem causing errors
DO LOOP
- Fixed a problem causing "Return without gosub"
Neopixels
- Implemented more command/ functions
- NEO.ROTATELEFT, NEO.ROTATELEFT, NEO.SHIFTLEFT, NEO.SHIFTRIGHT, NEO.REFRESH
- NEO.DIM, NEO.LIGHTEN, NEO.DARKEN, NEO.LINEARBLEND, NEO.BILINEARBLEND
Neoscroll
- Code completly rewritten to support many functionalities such as
- Based on a canvas
- Import of external fonts (same as for the TFT)
- Import of images / sprites
- Many new commands / functions implemented
ILI7789 TFT
- Implemented the support (5 settings)
SSD1351 OLED
- Implemented the support
Editor Page
- Fixed a problem on the URL of the help page
Fileman Page
- Improved the upload of the files with a upload status window
- Implemented the download of the module content in .zip format
FILE command
- Implemented the function FILE.FROMBASE64 to convert from base64 format
SPI bus
- Fixed the frequency and the format during the IOBUFFER functions
PEEK and POKE
- Implemented the functions / commands
- BAS.PEEK, BAS.PEEK8, BAS.PEEK16
- BAS.POKE, BAS.POKE8, BAS.POKE16
MQTT
- Implemented the command LWT (Last Will and Testament)
OLED
- Implemented the command OLED.BMP to read BMP b&w images
Sound output using internal DAC
- Fixed
DHT22 not working
- Fixed
IP shown on the QRCODE
- Fixed
Online Help 1.48.2 updated
Speed increase : the code has been optimized again
You do not have the required permissions to view the files attached to this post.
- PeterN
- Posts: 392
- Joined: Mon Feb 08, 2021 7:56 pm
- Location: Krefeld, Germany
- Has thanked: 184 times
- Been thanked: 220 times
- Contact:
Re: New version 1.48.2 to test before final release
Tested:
# M5Stack ATOM ECHO:
- nested DO ... LOOPs: OK
- MP3 radio at builtin DAC: OK
- NeoPixel: OK
# M5Stack Core with display#1 and #2
- Display OK
- QR-Coded IP-Adr: OK
- Internal I2S-DAC to internal analog Speaker: OK
- I2S to externeal DAC OK
# NODE-MCU with CCS811 eCO2-Sensor: OK
I will test TOF VL53LOX, CCS811, MAX7219, WS2812-NeoPixel-Matrix tomorrow
Thanks for the delicious omelet
# M5Stack ATOM ECHO:
- nested DO ... LOOPs: OK
- MP3 radio at builtin DAC: OK
- NeoPixel: OK
# M5Stack Core with display#1 and #2
- Display OK
- QR-Coded IP-Adr: OK
- Internal I2S-DAC to internal analog Speaker: OK
- I2S to externeal DAC OK
# NODE-MCU with CCS811 eCO2-Sensor: OK
I will test TOF VL53LOX, CCS811, MAX7219, WS2812-NeoPixel-Matrix tomorrow
Thanks for the delicious omelet
Re: New version 1.48.2 to test before final release
Thanks!
Great command OLED.BMP
"
OLED
- Implemented the command OLED.BMP to read BMP b&w images
"
Hope it happen on ESP8266 soon ...
Great command OLED.BMP
"
OLED
- Implemented the command OLED.BMP to read BMP b&w images
"
Hope it happen on ESP8266 soon ...
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
Re: New version 1.48.2 to test before final release
I'll try to implement for the next release[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sun Nov 20, 2022 12:04 pm Thanks!
Great command OLED.BMP
"
OLED
- Implemented the command OLED.BMP to read BMP b&w images
"
Hope it happen on ESP8266 soon ...
- PeterN
- Posts: 392
- Joined: Mon Feb 08, 2021 7:56 pm
- Location: Krefeld, Germany
- Has thanked: 184 times
- Been thanked: 220 times
- Contact:
Re: New version 1.48.2 to test before final release
# M5 ATOM LITE:
- ADC reading OK; -> levitation project still running
# NodeMCU 4MB:
- MAX7219 OK,
- WGETASYNC communication with OPENWEATHER-API: OK
# M5 ATOM-MATRIX:
- CCS811 eCO2-sensor: OK
- TELEGRAM communication as a telegram-BOT: OK
- NeoPixels: OK (neo.setup ; neo.strip)
- ADC reading OK; -> levitation project still running
# NodeMCU 4MB:
- MAX7219 OK,
- WGETASYNC communication with OPENWEATHER-API: OK
# M5 ATOM-MATRIX:
- CCS811 eCO2-sensor: OK
- TELEGRAM communication as a telegram-BOT: OK
- NeoPixels: OK (neo.setup ; neo.strip)
Re: New version 1.48.2 to test before final release
Francesco,
A nice update.
Test ESP32 CAN 1.48.2 with DHT22 and DS18B20 on a Lolin32 Pro.
DHT22-sensor: OK
DS18B20 does not work only -127 measurement.
Test ESP32 BLE CAN 1.48.2 with DHT22 and DS18B20 on a Lolin32 Pro.
DHT22-sensor: OK
DS18B20 does not work only -127 measurement.
Jan Volk
A nice update.
Test ESP32 CAN 1.48.2 with DHT22 and DS18B20 on a Lolin32 Pro.
DHT22-sensor: OK
DS18B20 does not work only -127 measurement.
Test ESP32 BLE CAN 1.48.2 with DHT22 and DS18B20 on a Lolin32 Pro.
DHT22-sensor: OK
DS18B20 does not work only -127 measurement.
Jan Volk
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
Re: New version 1.48.2 to test before final release
Thanks Peter for your testing, I'm happy to see that many things works well[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sun Nov 20, 2022 1:11 pm # M5 ATOM LITE:
- ADC reading OK; -> levitation project still running
# NodeMCU 4MB:
- MAX7219 OK,
- WGETASYNC communication with OPENWEATHER-API: OK
# M5 ATOM-MATRIX:
- CCS811 eCO2-sensor: OK
- TELEGRAM communication as a telegram-BOT: OK
- NeoPixels: OK (neo.setup ; neo.strip)
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
Re: New version 1.48.2 to test before final release
Thanks Jan, I'll check it[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sun Nov 20, 2022 3:20 pm Francesco,
A nice update.
Test ESP32 CAN 1.48.2 with DHT22 and DS18B20 on a Lolin32 Pro.
DHT22-sensor: OK
DS18B20 does not work only -127 measurement.
Test ESP32 BLE CAN 1.48.2 with DHT22 and DS18B20 on a Lolin32 Pro.
DHT22-sensor: OK
DS18B20 does not work only -127 measurement.
Jan Volk
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
Re: New version 1.48.2 to test before final release
What about the new "SAVE ZIP" button ?
You do not have the required permissions to view the files attached to this post.
- PeterN
- Posts: 392
- Joined: Mon Feb 08, 2021 7:56 pm
- Location: Krefeld, Germany
- Has thanked: 184 times
- Been thanked: 220 times
- Contact:
Re: New version 1.48.2 to test before final release
Hi Francesco
I have a minor problem with the new behavior of NEO.Setup and NEO.strip.
If Led_end_pos is wrongly set too high in NEO.STRIP, then the command is ignored without an error message. The "out of range" parameter was accepted in previous versions.
Took me some minutes to isolate that problem in an until now well working neopixel-code
I have a minor problem with the new behavior of NEO.Setup and NEO.strip.
If Led_end_pos is wrongly set too high in NEO.STRIP, then the command is ignored without an error message. The "out of range" parameter was accepted in previous versions.
Took me some minutes to isolate that problem in an until now well working neopixel-code
Code: [Local Link Removed for Guests]
' TEST OF NEO.SETUP and NEO.STRIP
NEO_PIN = 27
NEO_NUM = 25
NEO_END = NEO_NUM-1
neo.setup NEO_PIN,NEO_NUM ' set 25 neo rgb leds on the pin 27
neo.strip 0,NEO_END,2,2,2 ' set all leds to white
For I= 1 to 10
wlog I
if I <6 then
wlog "All LEDs do change now to a new random value"
neo.strip 0,NEO_END, rnd(100),rnd(100),rnd(100)
else
wlog "No more change at the LEDs as led_end_pos is out of range (to great) now"
neo.strip 0,NEO_END + 1 , rnd(100),rnd(100),rnd(100)
end if
pause 1000
next I
end