New multi version to test 1.43.4
- cicciocb
- Site Admin
- Posts: 2069
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 441 times
- Been thanked: 1364 times
- Contact:
New multi version to test 1.43.4
Hi all,
before releasing the next version, I prepared a package for Linux and Windows that contains a new toolkit.
I already included the JDK packages into the package, so this means that it should simply run using win.bat on windows and linux.sh on linux.
In any case, the installation instructions are the same as defined into this post [Local Link Removed for Guests]
except that the JDK packages are already included in the zip file so are not required.
Please do not hesitate to test and give me some feedback.
This package contains 5 version of annex :
annex for esp8266
annex32
annex32 witout BLE support (gives more free ram available)
annex for ESPCAM
annex for epaper LILYGO 4.7
The package is not really complete as the online help has not been updated but I would like to have some feedback before next step.
All the versions have been updated with new features and fixes :
Annex Change Log
Version 1.43.3
WIFI.CONNECT and WIFI.APMODE
- included the optional IP address
Annex32 Change Log
Version 1.43.4
E-paper version created
- command touch
- commands EPAPER.xxxx
ESP32 no BLE version created
- without BLE support (for more RAM available)
Telegram direct support implemented
- commands TELEGRAM.xxx
DAC OUTPUT implemented
- command PIN.DAC available on pin 25 and 26
CCS811 support implemented
HDC1080 support implemented
WGET$ and WPOST$
- implemented optional argument "Content-Type"
SLEEP command
- Implemented Wakeup from PIN
WIFI.CONNECT and WIFI.APMODE
- included the optional IP address
before releasing the next version, I prepared a package for Linux and Windows that contains a new toolkit.
I already included the JDK packages into the package, so this means that it should simply run using win.bat on windows and linux.sh on linux.
In any case, the installation instructions are the same as defined into this post [Local Link Removed for Guests]
except that the JDK packages are already included in the zip file so are not required.
Please do not hesitate to test and give me some feedback.
This package contains 5 version of annex :
annex for esp8266
annex32
annex32 witout BLE support (gives more free ram available)
annex for ESPCAM
annex for epaper LILYGO 4.7
The package is not really complete as the online help has not been updated but I would like to have some feedback before next step.
All the versions have been updated with new features and fixes :
Annex Change Log
Version 1.43.3
WIFI.CONNECT and WIFI.APMODE
- included the optional IP address
Annex32 Change Log
Version 1.43.4
E-paper version created
- command touch
- commands EPAPER.xxxx
ESP32 no BLE version created
- without BLE support (for more RAM available)
Telegram direct support implemented
- commands TELEGRAM.xxx
DAC OUTPUT implemented
- command PIN.DAC available on pin 25 and 26
CCS811 support implemented
HDC1080 support implemented
WGET$ and WPOST$
- implemented optional argument "Content-Type"
SLEEP command
- Implemented Wakeup from PIN
WIFI.CONNECT and WIFI.APMODE
- included the optional IP address
- PeterN
- Posts: 393
- Joined: Mon Feb 08, 2021 7:56 pm
- Location: Krefeld, Germany
- Has thanked: 184 times
- Been thanked: 221 times
- Contact:
Re: New multi version to test 1.43.4
Hi CiccioCB , this is such a great gift bag that in your modesty you forgot to mention the ANNEXCAM version that is also included
Thanks for this!!
- On Windows10: If no serial is connected at start of the win.bat, the toolkit will stop with a error-message. So a device always has to be connected BEFORE start.
-I can flash an ESP32 successfully - but can not open the serial monitor after this, as it says that the port is already open in other prog
EDIT: After a restart , the toolkit does not stop without a serialport any more , but still I can not open the serial monitor at all, although flashing at this com-port is ok
Thanks for this!!
- On Windows10: If no serial is connected at start of the win.bat, the toolkit will stop with a error-message. So a device always has to be connected BEFORE start.
-I can flash an ESP32 successfully - but can not open the serial monitor after this, as it says that the port is already open in other prog
EDIT: After a restart , the toolkit does not stop without a serialport any more , but still I can not open the serial monitor at all, although flashing at this com-port is ok
- Electroguard
- Posts: 867
- Joined: Mon Feb 08, 2021 6:22 pm
- Has thanked: 278 times
- Been thanked: 324 times
Re: New multi version to test 1.43.4
Some MX Linux Toolkit feedback:
Green button firmware upgrade works ok in Serial flasher, so I expect the other flashing options will still work ok.
Only the Backup/Restore tab remains greyed out, but several of the active ones do not work under MX Linux (whether running ./linux.sh or sudo ./linux.sh)...
IP Scan reports errors in the terminal window that it cannot find ARP" (see pic1).
Although the Change Log tab is active it still doesn't show any change info from any of the different firmware choices.
Sending a UDP message still doesn't work, but can be avoided by using an Annex UDP utility for monitoring network traffic.
Don't know if it might be interest, but I was able to create a working linux AppImage file for the previous Toolkit.
But not being a programmer I didn't know how to also include the various Toolkit dependencies - which I know can be done... cos the whole point of Appimages is to create standalone single file self-contained applications that can run on any version of linux without needing anything to be installed.
Green button firmware upgrade works ok in Serial flasher, so I expect the other flashing options will still work ok.
Only the Backup/Restore tab remains greyed out, but several of the active ones do not work under MX Linux (whether running ./linux.sh or sudo ./linux.sh)...
IP Scan reports errors in the terminal window that it cannot find ARP" (see pic1).
Although the Change Log tab is active it still doesn't show any change info from any of the different firmware choices.
Sending a UDP message still doesn't work, but can be avoided by using an Annex UDP utility for monitoring network traffic.
Don't know if it might be interest, but I was able to create a working linux AppImage file for the previous Toolkit.
But not being a programmer I didn't know how to also include the various Toolkit dependencies - which I know can be done... cos the whole point of Appimages is to create standalone single file self-contained applications that can run on any version of linux without needing anything to be installed.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 143
- Joined: Mon Feb 08, 2021 10:10 pm
- Location: Scotland
- Has thanked: 47 times
- Been thanked: 51 times
Re: New multi version to test 1.43.4
I did not get very far (using a new laptop with win 10).
It does not have a serial port and the device I wanted to access was remote so I got the serial port error at start after running win.bat.
' .
Ok - to be expected so clicked "OK" and tried to connect to the remote device - with valid url - but got another error:-
'
It does not have a serial port and the device I wanted to access was remote so I got the serial port error at start after running win.bat.
' .
Ok - to be expected so clicked "OK" and tried to connect to the remote device - with valid url - but got another error:-
'
You do not have the required permissions to view the files attached to this post.
- cicciocb
- Site Admin
- Posts: 2069
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 441 times
- Been thanked: 1364 times
- Contact:
-
- Posts: 143
- Joined: Mon Feb 08, 2021 10:10 pm
- Location: Scotland
- Has thanked: 47 times
- Been thanked: 51 times
Re: New multi version to test 1.43.4
At the risk of further embarrassment, I am missing the method of specifying the folders for uploads and downloads.
Putting all in one folder would mean overwriting other device's default.bas for example.
My current directory structure is as picture the numbers being the last 3 digits of the device url.
.
Putting all in one folder would mean overwriting other device's default.bas for example.
My current directory structure is as picture the numbers being the last 3 digits of the device url.
.
You do not have the required permissions to view the files attached to this post.
- cicciocb
- Site Admin
- Posts: 2069
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 441 times
- Been thanked: 1364 times
- Contact:
Re: New multi version to test 1.43.4
Thanks for your feedback, even if it looks quite a catastrophic release .
I'll try to understand why you face to these issues.
For bugs :
For the uploads / downloads, the folder names that cannot be changed actually.
I think that the best approach is to download into zipped file to gather a consistent association between files.
However, I could use the IP address of the module as a subfolder name for download or, if you think that is better, simply enable the folder selection
I'll try to understand why you face to these issues.
For bugs :
For the uploads / downloads, the folder names that cannot be changed actually.
I think that the best approach is to download into zipped file to gather a consistent association between files.
However, I could use the IP address of the module as a subfolder name for download or, if you think that is better, simply enable the folder selection
-
- Posts: 143
- Joined: Mon Feb 08, 2021 10:10 pm
- Location: Scotland
- Has thanked: 47 times
- Been thanked: 51 times
Re: New multi version to test 1.43.4
I can live with the zip file approach as I am able to specify the file name and folder for saving it.
- cicciocb
- Site Admin
- Posts: 2069
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 441 times
- Been thanked: 1364 times
- Contact:
Re: New multi version to test 1.43.4
Hi all,
again thanks for your testing.
Does someone else could check if the UDP works under windows and confirm that it does not work under linux ?
For Robin :
The ARP utility is probably missing in your installation.
I suppose that something like
should fix the problem
Yes, I forgot to include the change log files
The difficulty is to understand what are the dependencies really needed for any linux distribution.
again thanks for your testing.
Does someone else could check if the UDP works under windows and confirm that it does not work under linux ?
For Robin :
The ARP utility is probably missing in your installation.
I suppose that something like
Code: [Local Link Removed for Guests]
sudo apt-get install net-tools
.Although the Change Log tab is active it still doesn't show any change info from any of the different firmware choices.
Yes, I forgot to include the change log files
Yes, it could be very interesting to create a kind of portable version for linux.Don't know if it might be interest, but I was able to create a working linux AppImage file for the previous Toolkit.
The difficulty is to understand what are the dependencies really needed for any linux distribution.