Hi all,
I'm actually trying to release another version of the toolkit that will support 5 versions of annex :
Annex for exp8266
Annex for ESP32
Annex for ESP32 without BLE
Annex for ESPCAM
Annex for EPAPER
For each of these versions I would like to include a batch of example files tested and adapted for each version.
All shall be available in -full and -min version.
The idea is to include the following files :
esp8266-data-full.zip
esp8266-data-min.zip
esp32-data-full.zip (for both ESP32 versions (with or without BLE)
esp32-data-min.zip (for both ESP32 versions (with or without BLE)
espcam-data-full.zip
espcam-data-min.zip
epaper-data-full.zip
epaper-data-min.zip
So, I'm looking for some help to create, test and configure these files.
I already created a list of examples that are actually included into the toolkit but many of them should be tested / updated and selected depending on the version.
We could even create a full list of examples on GITHUB where everyone could send proposal and comments
So, please, if any volunteer is available let me know by raising your hand
Thanks
cicciocb
Request for some help
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
- PeterN
- Posts: 392
- Joined: Mon Feb 08, 2021 7:56 pm
- Location: Krefeld, Germany
- Has thanked: 184 times
- Been thanked: 220 times
- Contact:
Re: Request for some help
This is a raised hand
Can offer help especially with ANNEXCam on ESP32CAM and M5CAM
Peter
Can offer help especially with ANNEXCam on ESP32CAM and M5CAM
Peter
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
Re: Request for some help
Thanks PeterN and barneyb,
I'll send you the batch of demo files I have currently.
These includes also support for external devices (such as GUI for the TFT, sensors, etc)
I'll send you the batch of demo files I have currently.
These includes also support for external devices (such as GUI for the TFT, sensors, etc)
Re: Request for some help
I can help ... but right now the only HW I have at hand is https://www.olimex.com/Products/IoT/ESP ... e-hardware
I should receive by the end of july some traditional ESP32 boards
I should receive by the end of july some traditional ESP32 boards
Annex WiFi RDS [Local Link Removed for Guests]
[Local Link Removed for Guests] [Local Link Removed for Guests]
[Local Link Removed for Guests] [Local Link Removed for Guests]
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
Re: Request for some help
Thanks you very much,[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Jul 01, 2021 10:13 am I can help ... but right now the only HW I have at hand is https://www.olimex.com/Products/IoT/ESP ... e-hardware
I should receive by the end of july some traditional ESP32 boards
I'll send the files to you too
- cicciocb
- Site Admin
- Posts: 2060
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 439 times
- Been thanked: 1358 times
- Contact:
Re: Request for some help
Thanks to all,
I'm still in the process to clean all the examples I have to remove redundant or personal information.
I'll share all the batch with you all.
I'm still in the process to clean all the examples I have to remove redundant or personal information.
I'll share all the batch with you all.