BAS.DEVICE returns only 0

[PeterN]

Hello Francesco,
I have a M5Stack ATOM LITE that should return a 101 with this code line:

Code: [Local Link Removed for Guests]

ret=BAS.DEVICE

But instead it returns a 0.
I am using Annex CAN 1.52.4 LFS on this device.
My mistake or a problem?

[cicciocb]

Probably you set the module to "Generic".

You must set the correct module in the config page

image.png

[PeterN]

No ... was set correctly to M5 Atom

[cicciocb]

I cannot reproduce .. it works for me in latest version

[PeterN]

Well, you are right! Leaves me a bit astonished, as I thought I had double checked it.
Maybe I was to fast and did not do a hardreset after setting the module-type, timezone etc.
Worked well now.
Thanks and good night

[PeterN]

Now, the ATOM correctly sets the NeoPixed data pin accordingly to the found module type

I'm now quite happy with the WordClock, now completely 3D-printed and powered by the little ATOM lite.

IMG_5527.jpeg

IMG_8347.jpeg

[cicciocb]

Nice. Have you published the project on elektor?

[PeterN]

No - would be a nice project surely… but don’t want trouble as there still seem to be legal discussions and warnings from lawyers about patents on the front panels

[PeterN]

Just to give you an idea of how this WordClock project has evolved in the meantime, thanks to the helpful additional input of a friend who also built this. And I don't want to forget to mention that this was only possible thanks to the fantastic evolution of ANNEX32!!!

IMG_8382.jpeg

I put some efforts in the use of the build-in I2S-Spreaker in the M5Stack ATOM Echo. Now It spkeaks the IP_Adress, time, plays correct BigBen-Bell sound at every 15 Minutes , streams some radio-stations or plays just the radio-news identified by it's mp3-metadata.

Code and of cause the wordclocks front are a bit German-held.
Would be interesting wether this 5Minutes-resolution could be done in acceptable English-wording as well.
If someone is interested ... the attached zip-file includes all the necessary files - even the BigBen-sounds as mp3


EDIT: I can provide the STL-files if of interest

[PeterN]

Hi Francesco
A crazy idea came up when I used the ATOM Echo: It can receive an MP3-Stream already . Would be nice to be able to send an MP3-stream derived from the internal I2S-Mic too. That would give the ability to create a simple intercom between to ATOMs.

Have a nice sunny day!