Hi @cicciocb,
I'm sorry if I put this topic on the wrong place. I'm able to load and run the ESP32-8048S070 code at the device, nice demo by the way, congrats! But I'm not able to see the demo after disconnecting the device from USB. The screen turns black. What I need to do to keep the up/running after disconnecting from the computer USB? Again, sorry if the question is quite obvious for you and all the other guys but I'm new here.
Thanks you so much for the assistance.
Abraços
Black screen after first successfull app running
-
- Posts: 6
- Joined: Sun Feb 25, 2024 6:18 pm
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Black screen after first successfull app running
Hi ramante67, welcome to the group.
Don't worry, there are no stupid questions, and most importantly, don't hesitate to ask for help; here, you'll always find someone who can assist you.
What you need is simply to put the filename of the program to run at the startup of the module in the config page; the name must be the full name (including the path or the / if is in the root).
You'll find a specific autorun box in the config page
Don't worry, there are no stupid questions, and most importantly, don't hesitate to ask for help; here, you'll always find someone who can assist you.
What you need is simply to put the filename of the program to run at the startup of the module in the config page; the name must be the full name (including the path or the / if is in the root).
You'll find a specific autorun box in the config page
You do not have the required permissions to view the files attached to this post.