Tried to do OTA update from 1.51.8 to 1.52.1 OTA.
Got almost there but failed near the end.
Repeated several times, same result.
Tried to recover with online installer. Installs but then instantly tries to do an OTA update which then fails as before.
Cannot get out of this loop. Please advise.
Module ESP32-8048S070C
-
- Posts: 351
- Joined: Tue Jun 21, 2022 2:17 pm
- Location: South coast UK
- Has thanked: 187 times
- Been thanked: 113 times
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
-
- Posts: 351
- Joined: Tue Jun 21, 2022 2:17 pm
- Location: South coast UK
- Has thanked: 187 times
- Been thanked: 113 times
Re: Module ESP32-8048S070C
Close but still not working.
No longer keeps trying to do OTA but now gives error "edit_area_full.js.gz is missing!" and resets.
No longer keeps trying to do OTA but now gives error "edit_area_full.js.gz is missing!" and resets.
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Module ESP32-8048S070C
Restart the web browser and, if don"t work reflash the module completly with another version (all the partitions)
-
- Posts: 351
- Joined: Tue Jun 21, 2022 2:17 pm
- Location: South coast UK
- Has thanked: 187 times
- Been thanked: 113 times
Re: Module ESP32-8048S070C
Restarted browser. A little more response, but kept resetting.
Did FULL re-flash.
Looked promising but tried to run your demo1.bas and get "Out of memory line 20".
Flash Free: 10,338,304
RAM Free: 216,568
No other programs will run either.
Screen lights up, but then nothing.
Can open files and read them but nothing when trying to run.
pwm.out 7,value in immediate does not change brightness.
Have power cycled several times, same result.
Edit:Will try going right back to 1.51.8
EDIT2: Going back to 1.51.8 now works as before. Phew!
Did FULL re-flash.
Looked promising but tried to run your demo1.bas and get "Out of memory line 20".
Flash Free: 10,338,304
RAM Free: 216,568
No other programs will run either.
Screen lights up, but then nothing.
Can open files and read them but nothing when trying to run.
pwm.out 7,value in immediate does not change brightness.
Have power cycled several times, same result.
Edit:Will try going right back to 1.51.8
EDIT2: Going back to 1.51.8 now works as before. Phew!
Last edited by BeanieBots on Sun Jan 21, 2024 10:50 am, edited 1 time in total.
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
-
- Posts: 351
- Joined: Tue Jun 21, 2022 2:17 pm
- Location: South coast UK
- Has thanked: 187 times
- Been thanked: 113 times
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Module ESP32-8048S070C
there are 2 versions for the ESP32-S3, depending on the PSRAM type (opi or qspi)
You do not have the required permissions to view the files attached to this post.
-
- Posts: 351
- Joined: Tue Jun 21, 2022 2:17 pm
- Location: South coast UK
- Has thanked: 187 times
- Been thanked: 113 times
Re: Module ESP32-8048S070C
Yes, I think that was the original mistake. (for the 1st OTA attempt)[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sun Jan 21, 2024 10:49 am I think you flashed the wrong version ... yours is with OPI psram
Having done that to start with, the online flasher then kept presenting the wrong firmware list.
Just tried again and I now get the correct list.
-
- Posts: 351
- Joined: Tue Jun 21, 2022 2:17 pm
- Location: South coast UK
- Has thanked: 187 times
- Been thanked: 113 times
Re: Module ESP32-8048S070C
Thanks for your help.
Back up and running with the latest 1.52.1 OPI
Nothing in the last two change logs. Anything to look out for?
Back up and running with the latest 1.52.1 OPI
Nothing in the last two change logs. Anything to look out for?