Module ESP32-2432S integrated with Annex
Re: Module ESP32-2432S integrated with Annex
As a follow-up to our discussion of the ESP32-3248S035R CYD relative that has a 3.5 inch TFT, yesterday, I reconnected the SPI clock, MISO, and MOSI lines for the SD card from the separate connections on the ESP32 in parallel with the corresponding TFT and touch SPI connections to the ESP32. With this change, Annex32 properly uses the SD card with the appropriate SD chip select pin setting in configuration advanced settings. The 10000 Ohm pullup resistor on the SD MISO had to be disconnected to make it work.
-
- Posts: 2
- Joined: Mon Feb 06, 2023 2:14 am
Re: Module ESP32-2432S integrated with Annex
Hello,
is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.
TIA
is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.
TIA
Re: Module ESP32-2432S integrated with Annex
I used a ESP32-3248S035R CYD relative that has a 3.5 inch TFT resistive touch screen to upgrade the electronics in my BrownDog robot. It also uses an ESP32cam board mounted in the nose. Both are running Annex RDS.
You do not have the required permissions to view the files attached to this post.
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Module ESP32-2432S integrated with Annex
Very nice project, I'm happy to see what can be done with Annex RDS.[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Wed Feb 21, 2024 5:27 pm I used a ESP32-3248S035R CYD relative that has a 3.5 inch TFT resistive touch screen to upgrade the electronics in my BrownDog robot. It also uses an ESP32cam board mounted in the nose. Both are running Annex RDS.
Thanks
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Module ESP32-2432S integrated with Annex
Not yet.[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sat Feb 17, 2024 8:57 pm Hello,
is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.
TIA
-
- Posts: 2
- Joined: Mon Feb 06, 2023 2:14 am
Re: Module ESP32-2432S integrated with Annex
Thank you for the response.[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Fri Feb 23, 2024 1:49 pmNot yet.[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sat Feb 17, 2024 8:57 pm Hello,
is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.
TIA
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Module ESP32-2432S integrated with Annex
I've just updated a version 1.52.6 for the ESP32 including the BLE.[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Wed Feb 28, 2024 1:36 pm
Hello,
is there a firmware version that has both BLE and ESP32-2432S? I have tried multiple ways and cannot get bluetooth to work when tft and touch are working.
TIA
Hoping this will work for you