S3 1.53.7 update

Here we can discuss about the problem found
Post Reply
BeanieBots
Posts: 361
Joined: Tue Jun 21, 2022 2:17 pm
Location: South coast UK
Has thanked: 197 times
Been thanked: 115 times

S3 1.53.7 update

Post by BeanieBots »

Tried (several times) to update an ESP32-8048S070C from 1.52.1 to 1.53.7 using OTA
The process runs to completion OK and states complete.
However, the firmware reamains at 1.52.1 with none of the new features.
Does this module support the latest firmware or am I doing something wrong?
User avatar
PeterN
Posts: 406
Joined: Mon Feb 08, 2021 7:56 pm
Location: Krefeld, Germany
Has thanked: 193 times
Been thanked: 226 times
Contact:

Re: S3 1.53.7 update

Post by PeterN »

Hi BeanieBots,
did you update the flasher from 1.8 to version 1.9? I had a similar issue with ESP32 pico ... and Francesco solved this by the new version, which has to be flashed in its very own partition sadly via the serial line. [Local Link Removed for Guests]
Hope this thought helps you. Good luck
Peter
BeanieBots
Posts: 361
Joined: Tue Jun 21, 2022 2:17 pm
Location: South coast UK
Has thanked: 197 times
Been thanked: 115 times

Re: S3 1.53.7 update

Post by BeanieBots »

Seems to have done the trick. Thanks.
At least I now have the latest firmware, not tried OTA yet.
Post Reply