Tried (several times) to update an ESP32-8048S070C from 1.52.1 to 1.53.7 using OTA
The process runs to completion OK and states complete.
However, the firmware reamains at 1.52.1 with none of the new features.
Does this module support the latest firmware or am I doing something wrong?
S3 1.53.7 update
-
BeanieBots
- Posts: 565
- Joined: Tue Jun 21, 2022 2:17 pm
- Location: South coast UK
- Has thanked: 334 times
- Been thanked: 184 times
-
PeterN
- Posts: 792
- Joined: Mon Feb 08, 2021 7:56 pm
- Location: Krefeld, Germany
- Has thanked: 368 times
- Been thanked: 442 times
- Contact:
Re: S3 1.53.7 update
Hi BeanieBots,
did you update the flasher from 1.8 to version 1.9? I had a similar issue with ESP32 pico ... and Francesco solved this by the new version, which has to be flashed in its very own partition sadly via the serial line. [Local Link Removed for Guests]
Hope this thought helps you. Good luck
Peter
did you update the flasher from 1.8 to version 1.9? I had a similar issue with ESP32 pico ... and Francesco solved this by the new version, which has to be flashed in its very own partition sadly via the serial line. [Local Link Removed for Guests]
Hope this thought helps you. Good luck
Peter
-
BeanieBots
- Posts: 565
- Joined: Tue Jun 21, 2022 2:17 pm
- Location: South coast UK
- Has thanked: 334 times
- Been thanked: 184 times
Re: S3 1.53.7 update
Seems to have done the trick. Thanks.
At least I now have the latest firmware, not tried OTA yet.
At least I now have the latest firmware, not tried OTA yet.