M5Stack Core2 V1.1 Display Problem
- cicciocb
- Site Admin
- Posts: 2083
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 447 times
- Been thanked: 1371 times
- Contact:
Re: M5Stack Core2 V1.1 Display Problem
Perfect.
Check the other orientations, all should work properly and you can now play with the GUI, it should work too.
Check the other orientations, all should work properly and you can now play with the GUI, it should work too.
Re: M5Stack Core2 V1.1 Display Problem
all orientations are good except for portrait
it looks reverse and shifted
[Local Link Removed for Guests]
it looks reverse and shifted
[Local Link Removed for Guests]
You do not have the required permissions to view the files attached to this post.
- cicciocb
- Site Admin
- Posts: 2083
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 447 times
- Been thanked: 1371 times
- Contact:
Re: M5Stack Core2 V1.1 Display Problem
OK, this is the TFT.
But what about the touchscreen coordinates?
But what about the touchscreen coordinates?
Re: M5Stack Core2 V1.1 Display Problem
landscape and portrait reverse are ok
on landscape reverse there is a offset on x and y but the direction is ok
on portrait the orientation is 90° off
on landscape reverse there is a offset on x and y but the direction is ok
on portrait the orientation is 90° off
- cicciocb
- Site Admin
- Posts: 2083
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 447 times
- Been thanked: 1371 times
- Contact:
Re: M5Stack Core2 V1.1 Display Problem
The image is 90° (as I saw in the image) but this is another problem.[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu May 02, 2024 9:47 pm on portrait the orientation is 90° off
The coordinates should be ok (if the image was shown correctly)
OK, try again, I fixed the landscape reverse.
For the display, I'll fix another day
- cicciocb
- Site Admin
- Posts: 2083
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 447 times
- Been thanked: 1371 times
- Contact: