I flashed the latest 1.52.3 version on my ESP32-3246S035C, and in LANDSCAPE mode,
The touch coordinates matched the screen coordinates without using a touch.init command.
The GUI buttons also worked correctly.
I changed it to LANDSCAPE REVERSED mode and touch was not correct until I added a TOUCH.INIT 0
command to the start of my test program.
Capacitive touch on ESP32-3248S035C
Re: Capacitive touch on ESP32-3248S035C
The GUI buttons also worked correctly in LANDSCAPE REVERSED mode with TOUCH.INIT 0 at the start of the program.
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Capacitive touch on ESP32-3248S035C
PORTRAIT mode worked correctly for screen coordinates and GUI with TOUCH.INIT 1 at the start of the program.
PORTRAIT REVERSED mode did not work correctly with any of the TOUCH.INIT values 0 to 3.
PORTRAIT REVERSED mode did not work correctly with any of the TOUCH.INIT values 0 to 3.
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Capacitive touch on ESP32-3248S035C
Ok, thanks.[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sat Mar 16, 2024 9:46 am PORTRAIT mode worked correctly for screen coordinates and GUI with TOUCH.INIT 1 at the start of the program.
PORTRAIT REVERSED mode did not work correctly with any of the TOUCH.INIT values 0 to 3.
Could you try the version 1.52.4 and let me know if this fixed the PORTRAIT REVERSED (should be touch.init 3)?
Re: Capacitive touch on ESP32-3248S035C
I flashed version 1.52.4 on my ESP32-3248S035C module.
LANDSCAPE mode works properly either with no TOUCH.INIT command or with TOUCH.INIT 2 .
LANDSCAPE REVERSED mode works correctly with TOUCH.INIT 0 .
PORTRAIT mode works correctly with TOUCH.INIT 1 .
PORTRAIT REVERSED mode works correctly with TOUCH.INIT 3 .
Both GUI button performance and coordinate correspondence between TFT and touch were checked.
It all looks very good to me. Thank you again for all your work on this.
LANDSCAPE mode works properly either with no TOUCH.INIT command or with TOUCH.INIT 2 .
LANDSCAPE REVERSED mode works correctly with TOUCH.INIT 0 .
PORTRAIT mode works correctly with TOUCH.INIT 1 .
PORTRAIT REVERSED mode works correctly with TOUCH.INIT 3 .
Both GUI button performance and coordinate correspondence between TFT and touch were checked.
It all looks very good to me. Thank you again for all your work on this.
- cicciocb
- Site Admin
- Posts: 2095
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 450 times
- Been thanked: 1385 times
- Contact:
Re: Capacitive touch on ESP32-3248S035C
ok, good news, so I can close this subject.
I hope that this will be also useful to other users
I hope that this will be also useful to other users