Annex Toolkit multi platform beta version
- Electroguard
- Posts: 852
- Joined: Mon Feb 08, 2021 6:22 pm
- Has thanked: 273 times
- Been thanked: 321 times
Re: Annex Toolkit multi platform beta version
I'm unable to change any of the addresses in the Config tab, but none of them seem relevant to UDP so it didn't make much sense to me anyway.
However the UDP Console does seem to be transmitting broadcasts, but not receiving any broadcasts.
However the UDP Console does seem to be transmitting broadcasts, but not receiving any broadcasts.
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: Annex Toolkit multi platform beta version
I need to confirm (not really sure) but I think that the toolkit should answer on any interface (ethernet / wifi).[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Tue Apr 20, 2021 10:58 am I'm unable to change any of the addresses in the Config tab, but none of them seem relevant to UDP so it didn't make much sense to me anyway.
However the UDP Console does seem to be transmitting broadcasts, but not receiving any broadcasts.
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: Annex Toolkit multi platform beta version
Hi Robin,
I confirm that the utility can receive broadcast from all the local interfaces.
The broadcasts come from local interfaces or WiFi
It is not required to define the local IP as it answers and send on all the interfaces.
At least this is for windows, I'll check also on Linux.
Does someone else could confirm, please?
I confirm that the utility can receive broadcast from all the local interfaces.
The broadcasts come from local interfaces or WiFi
It is not required to define the local IP as it answers and send on all the interfaces.
At least this is for windows, I'll check also on Linux.
Does someone else could confirm, please?
You do not have the required permissions to view the files attached to this post.
- Electroguard
- Posts: 852
- Joined: Mon Feb 08, 2021 6:22 pm
- Has thanked: 273 times
- Been thanked: 321 times
Re: Annex Toolkit multi platform beta version
A nice touch would be if doing a blue button device 'read' could automatically select the appropriate device-type tab, ie: esp8266 or esp32 depending on the discovered device - not essential, but a convenience to avoid trying to flash the wrong type of device.
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: Annex Toolkit multi platform beta version
Yes, it is possible even if, unfortunately, the ESPCAM will always be recognized as an EP32.[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Wed Apr 21, 2021 12:51 pm A nice touch would be if doing a blue button device 'read' could automatically select the appropriate device-type tab, ie: esp8266 or esp32 depending on the discovered device - not essential, but a convenience to avoid trying to flash the wrong type of device.
However, it is not possible to flash the wrong type of device, an error message is shown and the device is not modified
- Electroguard
- Posts: 852
- Joined: Mon Feb 08, 2021 6:22 pm
- Has thanked: 273 times
- Been thanked: 321 times
Re: Annex Toolkit multi platform beta version
Haha... it was seeing those error messages several times when trying to update different devices which prompted the suggestion.
Speaking of which - might it be possible for the blue button to also report what firmware version is on the device ?
It could make it quicker and easier to check which devices need upgrading without first having to connect to them via wifi.
Speaking of which - might it be possible for the blue button to also report what firmware version is on the device ?
It could make it quicker and easier to check which devices need upgrading without first having to connect to them via wifi.
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: Annex Toolkit multi platform beta version
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Wed Apr 21, 2021 3:31 pm Haha... it was seeing those error messages several times when trying to update different devices which prompted the suggestion.
Speaking of which - might it be possible for the blue button to also report what firmware version is on the device ?
It could make it quicker and easier to check which devices need upgrading without first having to connect to them via wifi.
Reporting for the version?
Yes it is possible but this should require reading back the firmware from the module which takes almost the same time as for flashing it.
The easiest is to just look in the serial terminal window just after using the blue button as the version is shown when the module restarts.
-
- Posts: 17
- Joined: Tue Feb 09, 2021 7:01 pm
- Location: Budapest, Hungary
- Has thanked: 61 times
- Been thanked: 2 times
Re: Annex Toolkit multi platform beta version
Nice enhancements. Thank You!
IMHO it would be a neat feature, if the preloaded config.ini would contain more data fields. For me is a pain, to fill the time zone fields. Maybe I am too old?
IMHO it would be a neat feature, if the preloaded config.ini would contain more data fields. For me is a pain, to fill the time zone fields. Maybe I am too old?
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: Annex Toolkit multi platform beta version
Yes, I'll add more elements[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Apr 22, 2021 9:03 pm Nice enhancements. Thank You!
IMHO it would be a neat feature, if the preloaded config.ini would contain more data fields. For me is a pain, to fill the time zone fields. Maybe I am too old?
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: Annex Toolkit multi platform beta version
Hi All,
this is an updated version of the toolkit, nearly ready to be terminated.
This is the version 0.6 that includes :
A new page Html Converter A new page IP Scan A modified UDP page A modified config.ini page It includes also :
The auto tab selection when using the blue "Read Module Info"
Simply download the .jar file and replace the previous one.
this is an updated version of the toolkit, nearly ready to be terminated.
This is the version 0.6 that includes :
A new page Html Converter A new page IP Scan A modified UDP page A modified config.ini page It includes also :
The auto tab selection when using the blue "Read Module Info"
Simply download the .jar file and replace the previous one.
You do not have the required permissions to view the files attached to this post.