Peter, the model marked on the printed circuit board is:
HLK-LD2410C-V1.0
And it seems to respond in the Tool program with 256,000 baud.
https://mega.nz/file/HO52SLrb#3Ool3lGfe ... 0MeebZ_0-Q
LD2410 Human presence radar sensor
- Fernando Perez
- Posts: 378
- Joined: Mon Feb 15, 2021 10:09 pm
- Location: Santander (Spain)
- Has thanked: 195 times
- Been thanked: 267 times
Re: LD2410 Human presence radar sensor
You do not have the required permissions to view the files attached to this post.
- PeterN
- Posts: 393
- Joined: Mon Feb 08, 2021 7:56 pm
- Location: Krefeld, Germany
- Has thanked: 184 times
- Been thanked: 221 times
- Contact:
Re: LD2410 Human presence radar sensor
Seems to be the same tool for version B and C.
I used some special sequences to bring the module to engineering mode. Found that in the protocol description. Tried to find that for C-version too now - but ...
The website of https://www.hlktech.com/ throws sql exceptions at the moment.
I used some special sequences to bring the module to engineering mode. Found that in the protocol description. Tried to find that for C-version too now - but ...
The website of https://www.hlktech.com/ throws sql exceptions at the moment.
- Fernando Perez
- Posts: 378
- Joined: Mon Feb 15, 2021 10:09 pm
- Location: Santander (Spain)
- Has thanked: 195 times
- Been thanked: 267 times
Re: LD2410 Human presence radar sensor
Don't bother Peter, I'm actually involved with another project right now and I wanted to finish it before I messed with these boards. But they have arrived to me this morning and the irresistible temptation of "a new gadget" has been able to me. And they seem like a great invention!
- Fernando Perez
- Posts: 378
- Joined: Mon Feb 15, 2021 10:09 pm
- Location: Santander (Spain)
- Has thanked: 195 times
- Been thanked: 267 times
Re: LD2410 Human presence radar sensor
Good news! Everything works correctly with no other changes than connecting RX and TX to other pins.
I was using a Nodemcu ESP32-S and I have assigned RX-pin = 12, TX_pin = 14, with this result:
https://mega.nz/file/eCYlzbSK#JgtxhmDEC ... Dvqbl_U7Qk
Gracias, Peter.
I was using a Nodemcu ESP32-S and I have assigned RX-pin = 12, TX_pin = 14, with this result:
https://mega.nz/file/eCYlzbSK#JgtxhmDEC ... Dvqbl_U7Qk
Gracias, Peter.
- PeterN
- Posts: 393
- Joined: Mon Feb 08, 2021 7:56 pm
- Location: Krefeld, Germany
- Has thanked: 184 times
- Been thanked: 221 times
- Contact:
Re: LD2410 Human presence radar sensor
Fine that this works as expected now
Would be very interesting now to connect that radar device via bluetooth to an ANNEX32 equiped ESP32.
The LD2410 documentation about that ist poor. But I guess the protocol is just the same as via the wired serial connection.
Would be very interesting now to connect that radar device via bluetooth to an ANNEX32 equiped ESP32.
The LD2410 documentation about that ist poor. But I guess the protocol is just the same as via the wired serial connection.
-
- Posts: 115
- Joined: Thu Mar 02, 2023 10:15 pm
- Location: germany
- Has thanked: 64 times
- Been thanked: 23 times
Re: LD2410 Human presence radar sensor
runs for me too[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Tue Apr 11, 2023 8:37 pm Good news! Everything works correctly with no other changes than connecting RX and TX to other pins.
I was using a Nodemcu ESP32-S and I have assigned RX-pin = 12, TX_pin = 14, with this result:
https://mega.nz/file/eCYlzbSK#JgtxhmDEC ... Dvqbl_U7Qk
Gracias, Peter.
Modules : 3xESP32-Cam MB (Chip"DM ESP32 S" ),AI-Thinker Audio Kit (ES8388), ESP32 Dev Kit with Display