Thanks for the quick response cicciocb, unfortunately, I only have access to a Linux Mint system.
I can see and program a standard ESP32 ( the TTGO module with an ESP32-DOWD06 chip) via USB C connection using Annex Toolkit with no problems - it is the -C3 version on the T-PicoC3 module that I can not read or program.
Looking at the log, it appears that I am not setting/resetting the RTS line which I guess should put the unit into program mode?? Is it necessary to manually apply a 'program mode' connection?
As an aside, are there any other users out there running Linux Mint trying to connect to the LILYGO T-PicoC3 module with Annex Toolkit?
Thanks, Doug.
New AnnexToolKit 1.1 including release 1.48.22
- cicciocb
- Site Admin
- Posts: 2069
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 441 times
- Been thanked: 1364 times
- Contact:
Re: New AnnexToolKit 1.1 including release 1.48.22
Did you put the module in programming mode putting the pin GPIO9 to GND?
https://docs.espressif.com/projects/esp ... ction.html
Important : put the pin GPIO9 to GND and THEN connect the USB cable to your PC (obviously putting the cable in the right orientation for the ESP32-c3 > green led ON)
https://docs.espressif.com/projects/esp ... ction.html
Important : put the pin GPIO9 to GND and THEN connect the USB cable to your PC (obviously putting the cable in the right orientation for the ESP32-c3 > green led ON)
- douglasp
- Posts: 10
- Joined: Fri Sep 17, 2021 2:09 am
- Location: Australia
- Has thanked: 3 times
- Been thanked: 2 times
Re: New AnnexToolKit 1.1 including release 1.48.22
Thanks cicciocb - works a treat - it is easy when you do it correctly!!!
Regards, Doug.
Regards, Doug.
Re: New AnnexToolKit 1.1 including release 1.48.22
Hi All,
Is there a link to download only AnnexToolKit 1.1 the whole 192megabytes is a bit heavy
from google drive for just the new Toolkit.
I'm not upto scratch with ESP32.
If not possible I will stick to the old AnnexToolkit
Cheers, Hanspeter.
Is there a link to download only AnnexToolKit 1.1 the whole 192megabytes is a bit heavy
from google drive for just the new Toolkit.
I'm not upto scratch with ESP32.
If not possible I will stick to the old AnnexToolkit
Cheers, Hanspeter.
Re: New AnnexToolKit 1.1 including release 1.48.22
Hi,
I love your idea, I love the execution, it's a great tool. I would really appreciate one more update for the 8266 version, purely as I'd love to use my RGB matrix with text up the right way (need the chars up the other way). Also, would like to have some of the optimisations (2x) on the slower 8266 where it could make the bigger difference. I also like the ESP32, but it runs hotter, requires more power. But if there's a work-around for the text being upside down let me know please, I ended up creating my own routines and font for text, but obviously doesn't scroll as smoothly!
I'm also using one to control my central heating, for the past couple of years, which has been working really well. And I really appreciate your work on continual improvements. It's a terrific project, with real value. Just for fun here's a screen shot of my central heating app.
I love your idea, I love the execution, it's a great tool. I would really appreciate one more update for the 8266 version, purely as I'd love to use my RGB matrix with text up the right way (need the chars up the other way). Also, would like to have some of the optimisations (2x) on the slower 8266 where it could make the bigger difference. I also like the ESP32, but it runs hotter, requires more power. But if there's a work-around for the text being upside down let me know please, I ended up creating my own routines and font for text, but obviously doesn't scroll as smoothly!
I'm also using one to control my central heating, for the past couple of years, which has been working really well. And I really appreciate your work on continual improvements. It's a terrific project, with real value. Just for fun here's a screen shot of my central heating app.
You do not have the required permissions to view the files attached to this post.
- cicciocb
- Site Admin
- Posts: 2069
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 441 times
- Been thanked: 1364 times
- Contact:
Re: New AnnexToolKit 1.1 including release 1.48.22
Thanks for the feedback, I'll try to update the esp8266[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Mon Mar 20, 2023 6:08 pm Hi,
I love your idea, I love the execution, it's a great tool. I would really appreciate one more update for the 8266 version, purely as I'd love to use my RGB matrix with text up the right way (need the chars up the other way). Also, would like to have some of the optimisations (2x) on the slower 8266 where it could make the bigger difference. I also like the ESP32, but it runs hotter, requires more power. But if there's a work-around for the text being upside down let me know please, I ended up creating my own routines and font for text, but obviously doesn't scroll as smoothly!
I'm also using one to control my central heating, for the past couple of years, which has been working really well. And I really appreciate your work on continual improvements. It's a terrific project, with real value. Just for fun here's a screen shot of my central heating app.
Re: New AnnexToolKit 1.1 including release 1.48.22
hi ,( this is my first post .. sorry for my bad english)
i'm an old newbie .. my first computer was an TRS-80 MKI .
I try to flash M5Atom Lite .. but can't :
-- read module info : OK
-- erase the flash memory : OK
but flashing with toolkit V1.1 the release 1.48.22 crash
i'm in Linux Mint ...
thanks for this nice project ..
i try to use it with MQTT and a motor with RS485 communication , trying to control a Dobson Scope .
@+
TRS-80 /MKI
screenshot from popup error ..
i'm an old newbie .. my first computer was an TRS-80 MKI .
I try to flash M5Atom Lite .. but can't :
-- read module info : OK
-- erase the flash memory : OK
but flashing with toolkit V1.1 the release 1.48.22 crash
i'm in Linux Mint ...
thanks for this nice project ..
i try to use it with MQTT and a motor with RS485 communication , trying to control a Dobson Scope .
@+
TRS-80 /MKI
screenshot from popup error ..
You do not have the required permissions to view the files attached to this post.
- cicciocb
- Site Admin
- Posts: 2069
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 441 times
- Been thanked: 1364 times
- Contact:
Re: New AnnexToolKit 1.1 including release 1.48.22
Have you tried with the online flasher ?
[Local Link Removed for Guests]
The online version is not the latest but maybe it works for you
[Local Link Removed for Guests]
The online version is not the latest but maybe it works for you
Re: New AnnexToolKit 1.1 including release 1.48.22
Thanks for the reply ,
Not yet ..
I'm gonna try it asap.
@+
TRS80/MKI
Not yet ..
I'm gonna try it asap.
@+
TRS80/MKI