Editor css

Give it a try, it costs you nothing !
Post Reply
ulli
Posts: 47
Joined: Tue Feb 09, 2021 9:48 am
Location: Monschau, Germany
Has thanked: 8 times
Been thanked: 2 times

Editor css

Post by ulli »

Hi all,

just to keep it in mind:

Maybe you can let the firmware read an optional css file from the file
system which is originally empty (or non-existant but with a
well-known name). This would enable the user to add his own css.


Ciccio replied:

Yes, this is a good idea.
I have an old idea coming from Robin (Electroguard) still to develop but essentially yes, can be done.


My original post was:

Hi ciccio,

the editor window is very small whereas the (rarely needed) log window is
gigantic.

Can I permanently change the editor css such that .box1 ... .box6 are
simply same width stacked on each other? If so, where can I do this? Or
is it something where only you have access?

Your css currently gives 1/3 to the editor window and 2/3 to .box4 ...
.box6. Maybe a switch to 2/3 for the editor and 1/3 for the others might
also work.

Thanks for all your efforts and for your kind answer.

Cheers
The light at the end of the tunnel has been switched off for energy saving reasons.
HPB
Posts: 18
Joined: Mon Mar 01, 2021 9:30 am
Has thanked: 31 times
Been thanked: 2 times

Re: Editor css

Post by HPB »

Hi All what's the reasoning behind Annex small Editor window and a Large Log window

I thought this was supposed to be resolved by now, and any optional possibility in hiding the Log Window altogether.

Kind regards,
Hanspeter.
Post Reply