Hi Cicciocb
Many moons ago, you suggested integrating a tach option in "count". Did you ever get the chance to do this?
Thanks for all your efforts!
Zim
Tachometer option for "count"
- cicciocb
- Site Admin
- Posts: 1964
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 422 times
- Been thanked: 1310 times
- Contact:
Re: Tachometer option for "count"
Just wondering if you were going to build in this option at some point. I am going to take on a new tach project with a touch screen and was curious if you ever had built in the option. Seems to me you were going to analyze the time between pulses and calculate out RPM. A buffer setting would also be cool.
- cicciocb
- Site Admin
- Posts: 1964
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 422 times
- Been thanked: 1310 times
- Contact:
Re: Tachometer option for "count"
Hi Zim,
what you are requesting is the function that you are already using COUNTER.PERIOD(1)
This function measure the time between 2 pulses and gives the time between them.
what you are requesting is the function that you are already using COUNTER.PERIOD(1)
This function measure the time between 2 pulses and gives the time between them.