Can anyone please point me to any resource to help me understand and develop code to integrate Wemos d1 mini pro to sx1276 based LoRa rf modules.
There are plenty of examples using Arduino but I want to stick with Annex.
I am quite happy with spi interfacing but somewhat struggling to understand how to implement preambles; spreading factor; packet header; CRC and other parameters selectable on the 1276 chip. I have tried reading the sx1276 data sheet and frankly, I get totally lost.
Any pointers to on-line practical help would be much appreciated.
LoRa
- cicciocb
- Site Admin
- Posts: 1966
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 422 times
- Been thanked: 1311 times
- Contact:
- cicciocb
- Site Admin
- Posts: 1966
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 422 times
- Been thanked: 1311 times
- Contact:
Re: LoRa
Hi,
I plan to integrate into ESP32 modules, not in the ESP8266 in modules like this one https://www.ebay.fr/itm/173624285281
I plan to integrate into ESP32 modules, not in the ESP8266 in modules like this one https://www.ebay.fr/itm/173624285281
- cicciocb
- Site Admin
- Posts: 1966
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 422 times
- Been thanked: 1311 times
- Contact:
Re: LoRa
Hi,
the cost difference between the ESP8266 and the ESP32 is almost zero so it worth to use an ESP32 today.
You'll not obliged to use a module like the one I shown as it will always be possible to use a bare LORA module connected to a bare ESP32 module
the cost difference between the ESP8266 and the ESP32 is almost zero so it worth to use an ESP32 today.
You'll not obliged to use a module like the one I shown as it will always be possible to use a bare LORA module connected to a bare ESP32 module
- cicciocb
- Site Admin
- Posts: 1966
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 422 times
- Been thanked: 1311 times
- Contact: