The object in action ...
A hardware and software project for a friend who loves clocks in all variants.
It has two concentric NeoPixel rings and some moving parts to form a kinetic object that can even display time in an old-fashioned "analog" way . Hours are displayed on the inner ring, minutes and seconds on the outer ring.
The electronics are located in the base of the object
Here you will find a short VIDEO of the object: https://vimeo.com/387921846
and here a more detailed Blog-post https://peterneufeld.wordpress.com/2020 ... xel-ring/
An ESP8266 (Wemos D1 mini) controls 86 neopixel LEDs and a 3V mini motor to turn a wooden ring.
A second mini-motor permanently rotates the wooden gearwheel mechanism of a weekday calendar, but actually only to make it look like something more.. This is a nice laser cut model from UGears..
The wooden ring rotates once a minute for a few seconds around the object.
All this reminded me a bit of the TV series "Stargate" - hence the name in the web interface.
The webinterface ...
The web interface allows to set the color of the "hands" for the hours, minutes and seconds of the clock and the hour markers. The RGB values can be saved permanently for the next program start.
There are several buttons to display some light effects on the neopixel rings.
The BASIC-listing for ESP8266 and ANNEX-WIFI RDS (min V1.4x):
Code: [Local Link Removed for Guests]
'############################################################################################################
VERSION$ = "1.1"
' Uhr mit zwei NeoPixel-Ringen an D4(!!!)
' und PWM-Signal an D7 für einen gesteuerten Motor
' Jan 2020: Erweiterung von 84 auf 85 LEDs zur
' Mittenbeleuchtung der zusätzlichen Mechanik der Uhr
cls
'für drehzahlgesteuerten Motor mit PWM-Signal an D7
D7 = 13 ' D7 = GPIO13
VAL_PWM = 0
VAL_PWM_alt = 1
OPTION.PWMFREQ 10000 '100Hz ist in 1.37beta die kleinste mögliche Frequenz für PWM. Default ist 1000Hz
pwm(D7)=VAL_PWM
x = 0: y = 0: z = 0
mm = 0: hh = 0: ss = 0
R = 5: G = 25 : B = 0
R_alt = R + 1
G_alt = G
B_alt = B
Mark_R = 0 : Mark_G = 1 : Mark_B = 1
Sec_R = 1 : Sec_G = 1 : Sec_B = 1
t$ = "TIME"
'gosub SHOW_IP
Gosub READ_RGB_DATA
gosub STARTUP
OnHtmlReload HTML_PAGE
gosub HTML_PAGE
timer0 1000, SHOW_TIME
wait
' ###################################
' ###################################
' ###################################
Mode_CLOCK:
timer0 0
mm = 0
hh = 0
gosub STARTUP
timer0 1000, SHOW_TIME
wait
'
' ###################################
SHOW_TIME:
mm_alt = mm
hh_alt = hh
ss_alt = ss
t$ = time$
'dw = mid(bla,1,3) 'dow
'mh = mid(bla,5,3) 'month
'dt = mid(bla,9,2) 'date
hh = val(mid$(t$,1,2)) 'hour
mm = val(mid$(t$,4,2)) 'min
ss = val(mid$(t$,7,2)) 'sec
'Motor in den letzten 5 Sekunden einer Minute kurz anwerfen VAL_PWM = 0
if ss >54 then
VAL_PWM = 800
else
' Motor zu Sicherheit ausschalten;
' Dazwischen geht auch manuelle Bedienung mit dem Slider
if ss = 1 then VAL_PWM= 0
end if
if hh > 11 then hh = hh -12
hh = (hh * 2) + 60
if mm > 31 then hh = hh + 1
'neo.strip 0,84,1,1,1,1
neo.strip 0,84,0,0,0,1
'
''neo.pixel ss_alt,0,0,0,1
''neo.pixel mm_alt,0,0,0,1
''neo.pixel hh_alt,0,0,0,1
'Stundenmarkierungen aussen
for i = 0 to 58 step 5
neo.pixel i,Mark_R,Mark_G,Mark_B,1
next i
'Stundenmarkierungen innen
'for i = 60 to 84 step 6
' neo.pixel i,Mark_R,Mark_G,Mark_B,1
'next i
'die Zeiger setzten
neo.pixel ss,Sec_R,Sec_G,Sec_B,1
neo.pixel mm,R,G,B,1
neo.pixel hh,R,G,B,1
'Mittelbeleuchtung
neo.pixel 85,R*3 mod 100,G*3 mod 100,B*3 mod 100,1
'erst jetzt den Neopixel-puffer senden
neo.pixel 84,R,G,B,0
'
'PWM an D7 aendern, wenn neuer Wert
if VAL_PWM <> VAL_PWM_alt then
pwm(D7) = VAL_PWM mod 1024
VAL_PWM_alt = VAL_PWM
end if
refresh
return
' ###################################
LIGHTSHOW1:
timer0 0
t$="LIGHTSHOW1"
neo.strip 0,84,0,0,0
'do
for xx = 1 to 5
for p = 0 to 59
neo.pixel p,55,0,0
neo.pixel 59 - p,55,0,0
neo.pixel p,0,0,0
neo.pixel 59-p,0,0,0
next p
for p = 0 to 59
neo.pixel p,0,55,0
neo.pixel 59-p,0,55,0
neo.pixel p,0,0,0
neo.pixel 59-p,0,0,0
next p
for p = 0 to 59
neo.pixel p,0,0,55
neo.pixel 59-p,0,0,55
neo.pixel p,0,0,0
neo.pixel 59-p,0,0,0
next p
next xx
timer0 1000, SHOW_TIME
return
' ###################################
LIGHTSHOW2:
'pacman
timer0 0
t$="PACMAN"
neo.strip 60,84,0,10,10
schritt_x = 1
schritt_y = 1.8
schritt_z = 1.2
do
x_alt = x
x = x + schritt_x
if (x > 59) or (x < 1) then
schritt_x = schritt_x * -1
end if
y_alt = y
y = y + schritt_y
if (y > 59) or (y < 1) then
schritt_y = schritt_y * -1
end if
z_alt = z
z = z + schritt_z
if (z > 59) or (z < 1) then
schritt_z = schritt_z * -1
end if
neo.pixel x,84,0,0,1
neo.pixel x_alt,0,0,0,1
neo.pixel y,0,60,0,1
'neo.pixel y_alt,0,0,0,1
neo.pixel z,0,0,60,1
neo.pixel z_alt,0,0,0,0
pause 40
loop until 0
wait
' ###################################
LIGHTSHOW3:
timer0 0
t$="LIGHTSHOW 3"
neo.strip 0,93,0,0,0
neo.strip 0,84,0,0,0
for i = 0 to 59
if i < 29 then
neo.pixel 29-i,5,5,0,0
neo.pixel 29+i,5,5,0,0
neo.pixel (59 + 12 - i / 2),5,5,0,0
neo.pixel (59 + 12 + i / 2),5,5,0,0
end if
neo.pixel i,1,1,5,0
neo.pixel (60 -i),1,5,1,0
neo.pixel (60 + 12 - i / 2),1,1,5,0
neo.pixel (60 + 12 + i / 2),1,5,1,0
pause 20
next i
neo.strip 0,84,0,0,0
for i = 1 to 30000
ii = i MOD 60
iii= (ii/5)*2
'if ii = 1 then
gg= i mod 50
rr= i+15 mod 50
bb= i+30 mod 50
'end if
neo.strip 0,59+24+1,0,0,0,1
neo.pixel ii,rr,gg,bb,1
neo.pixel (ii+20)mod 60,gg,bb,rr,1
neo.pixel (ii+40)mod 60,bb,rr,gg,1
' iii=iii/1.5
' neo.pixel 83-iii,rr,gg,bb,1
' neo.pixel 83 -abs((iii-8)mod 23),gg,bb,rr,1
' neo.pixel 83 -abs((iii-16)mod 23),bb,rr,gg,1
neo.pixel 60+iii,rr,gg,bb,1
neo.pixel 60+abs((iii-8)mod 23),gg,bb,rr,1
neo.pixel 60+abs((iii-16)mod 23),bb,rr,gg,1
neo.pixel 84,bb,rr,gg,0
pause 25
next i
return
' ###################################
STARTUP:
neo.setup 86
neo.strip 0,86, 0,0,0
for i = 0 to 29
neo.pixel (30-i),30-i,2+i,0,1
neo.pixel (30+i),30-i,2+i,0,1
neo.pixel (72+((i/5)*2)),1,i,0,1
neo.pixel (72-((i/5)*2)),1,i,0,1
neo.pixel (84),1,i,0,0
pause 120-i*3
next i
neo.strip 0,86,11,211,11
pause 10
neo.strip 0,86,0,0,0
return
' ###################################
' ###################################
HTML_PAGE:
cls
autorefresh 750
a$ = ""
a$ = a$ & "
S T A R G A T E -V“& VERSION$ & „
"
a$ = a$ & textbox$(t$)
a$ = a$ & "
"
a$ = a$ & "Colour of the hour and minute hands:"
a$ = a$ & "
"
a$ = a$ & SLIDER$(R,0,100)
a$ = a$ & "R:"
a$ = a$ & textbox$(R)
a$ = a$ & "
"
a$ = a$ & slider$(G,0,100)
a$ = a$ & "G:"
a$ = a$ & textbox$(G)
a$ = a$ & "
"
a$ = a$ & slider$(B,0,100)
a$ = a$ & "B:"
a$ = a$ & textbox$(B)
a$ = a$ & "
"
a$ = a$ & button$("Save RGB", SAVE_RGB_DATA)
a$ = a$ & "
"
a$ = a$ & "Colour of the second hand:"
a$ = a$ & "
"
a$ = a$ & SLIDER$(Sec_R,0,100)
a$ = a$ & "R:"
a$ = a$ & textbox$(Sec_R)
a$ = a$ & "
"
a$ = a$ & slider$(Sec_G,0,100)
a$ = a$ & "G:"
a$ = a$ & textbox$(Sec_G)
a$ = a$ & "
"
a$ = a$ & slider$(Sec_B,0,100)
a$ = a$ & "B:"
a$ = a$ & textbox$(Sec_B)
a$ = a$ & "
"
a$ = a$ & button$("Save RGB", SAVE_RGB_DATA)
a$ = a$ & "
"
a$ = a$ & "Colour of the hour and 5-minute markers:"
a$ = a$ & "
"
a$ = a$ & SLIDER$(Mark_R,0,10)
a$ = a$ & "R:"
a$ = a$ & textbox$(Mark_R)
a$ = a$ & "
"
a$ = a$ & slider$(Mark_G,0,10)
a$ = a$ & "G:"
a$ = a$ & textbox$(Mark_G)
a$ = a$ & "
"
a$ = a$ & slider$(Mark_B,0,10)
a$ = a$ & "B:"
a$ = a$ & textbox$(Mark_B)
a$ = a$ & "
"
a$ = a$ & button$("Save RGB", SAVE_RGB_DATA)
a$ = a$ & "
"
a$ = a$ & "PWM-Signal for motor at D7:"
a$ = a$ & "
"
a$ = a$ & slider$(VAL_PWM,0,1023)
a$ = a$ & "
VAL_PWM:"
a$ = a$ & textbox$(VAL_PWM)
a$ = a$ & "
MODUS: "
a$ = a$ & button$("LIGHTSHOW", LIGHTSHOW1)
a$ = a$ & button$("PacMan LIGHTSHOW2", LIGHTSHOW2)
a$ = a$ & button$("LIGHTSHOW3", LIGHTSHOW3)
a$ = a$ & button$("CLOCK", Mode_CLOCK)
html a$
a$=""
return
' ###################################
Exit:
end
' ###################################
SHOW_IP:
IPADR$= word$(word$(IP$,1),4,".")
return
' ###################################
TestExit:
timer0 0
neo.strip 0,84,0,8,0
pause 500
neo.strip 0,84,0,5,0
pause 500
neo.strip 0,84,0,2,0
pause 500
neo.strip 0,84,0,1,0
pause 500
for i = 0 to 29
neo.pixel i,0,0,0,1
neo.pixel 60-i,0,0,0,1
neo.pixel i/2+60,0,0,0,1
neo.pixel 84-i/2,0,0,0,0
pause 50
next i
neo.pixel 30,0,10,0,1
neo.pixel 72,0,10,0,0
'######
end
'######
' ##############################################################
SAVE_RGB_DATA:
' schreibt die Einstellungen in einzelne Dateien im Flash
t$ = "DATA ..."
xxx$ = "RGB-DATA"
file.save "/clock/settings",xxx$
file.save "/clock/R", str$(R)
file.save "/clock/G", str$(G)
file.save "/clock/B", str$(B)
file.save "/clock/Sec_R", str$(Sec_R)
file.save "/clock/Sec_G", str$(Sec_G)
file.save "/clock/Sec_B", str$(Sec_B)
file.save "/clock/Mark_R", str$(Mark_R)
file.save "/clock/Mark_G", str$(Mark_G)
file.save "/clock/Mark_B", str$(Mark_B)
t$ = "DATA SAVED"
return
' ##############################################################
READ_RGB_DATA:
if file.exists("/clock/settings") then SETTINGS$ = file.read$("/clock/settings")
if SETTINGS$ <> "" then
R = val(file.read$("/clock/R"))
G = val(file.read$("/clock/G"))
B = val(file.read$("/clock/B"))
Sec_R = val(file.read$("/clock/Sec_R"))
Sec_G = val(file.read$("/clock/Sec_G"))
Sec_B = val(file.read$("/clock/Sec_B"))
Mark_R = val(file.read$("/clock/Mark_R"))
Mark_G = val(file.read$("/clock/Mark_G"))
Mark_B = val(file.read$("/clock/Mark_B"))
endif
return
' ##############################################################