playing mp3

Here we can discuss about the problem found
Post Reply
User avatar
PANNO
Posts: 57
Joined: Thu Feb 25, 2021 4:03 am
Has thanked: 51 times
Been thanked: 9 times

playing mp3

Post by PANNO »

HI cicciocb,

on init the soundengine i get some spikes at the start from a mp3 song .
is it possible to catch these by an other programming routine or do i need an relais ?
User avatar
PeterN
Posts: 97
Joined: Mon Feb 08, 2021 7:56 pm
Location: Krefeld, Germany
Has thanked: 41 times
Been thanked: 45 times
Contact:

Re: playing mp3

Post by PeterN »

Hi Panno,

do you observe the spikes in a setup with an external I2S-D/A-audio converter or are you using the internal D/A conversion at pin25?
Only with the internal conversion I can see/ hear this in my setup. May be because the Output pin is set to Vss/2= 1.6V as soon as initializing the analog output for playing the MP3.
If the output goes to a headset etc a serial 100nF condensor as high-pass can help.
User avatar
PANNO
Posts: 57
Joined: Thu Feb 25, 2021 4:03 am
Has thanked: 51 times
Been thanked: 9 times

Re: playing mp3

Post by PANNO »

HI Peter,
thx for your Test. At the moment iam playing with an Lolin d32 Pro v2.0. the spikes coming on pin 25 using the esp32 intern dac.
i will test i2s tonight and show some results here.

danke fürs schauen
Post Reply