New multi version to test 1.43.4

Here you'll find the updated available
skybandit
Posts: 3
Joined: Wed Feb 24, 2021 4:40 pm
Been thanked: 2 times

Re: New multi version to test 1.43.4

Post by skybandit »

Hi , Great Software. I use Linux Ubuntu 20.04 , seems to work ok - still testing. Flashed using Serial - OK , then Tried OTA - worked like a dream. I prefer the Linux Version as opposed to Windows as you can run it on a lower spec device if needed.
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1269 times
Contact:

Re: New multi version to test 1.43.4

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Fri Jul 23, 2021 11:04 am Hi , Great Software. I use Linux Ubuntu 20.04 , seems to work ok - still testing. Flashed using Serial - OK , then Tried OTA - worked like a dream. I prefer the Linux Version as opposed to Windows as you can run it on a lower spec device if needed.
Thanks to confirm that it works for you, this is a good news.

With Ubuntu I'm quite confident as it is the version that I use for the testing / development.
gianmagna
Posts: 15
Joined: Sun Feb 14, 2021 11:47 am
Has thanked: 22 times
Been thanked: 4 times

Re: New multi version to test 1.43.4

Post by gianmagna »

Ciao Francesco
ho Win10 32bit e non riesco a provare questa versione.
Posso continuare a usare il toolkit solito e mettere i .bin in BUILD ?

hai ancora le schede "Annex32 tft test board" ? ,se si me ne serve una ,
dimmi il costo compreso spedizione così ti mando il pagamento per paypal
grazie
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1269 times
Contact:

Re: New multi version to test 1.43.4

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sat Jul 24, 2021 8:52 pm Ciao Francesco
ho Win10 32bit e non riesco a provare questa versione.
Posso continuare a usare il toolkit solito e mettere i .bin in BUILD ?
Purtroppo non funziona con win32, dovresti trovare un javaFX SDK per win32 che sembra non esista.
In effetti questa architettura 32bits sembra non essere supportata da javaFX.
Puoi effettivamente copiare il bin nella versione precedente
hai ancora le schede "Annex32 tft test board" ? ,se si me ne serve una ,
dimmi il costo compreso spedizione così ti mando il pagamento per paypal
Ho ancora qualche PCB pero' non ho il tempo di costruirne né l'intenzione di venderli, per il momento.
lyizb
Posts: 93
Joined: Fri Feb 12, 2021 8:23 pm
Has thanked: 37 times
Been thanked: 23 times

Re: New multi version to test 1.43.4

Post by lyizb »

Thanks very much for this. I don't have a Linux device which isn't headless, so tested only in Windows, and so far, only on ESP8266 D1 Mini.

Flashing reported success, but in the Editor, it says version 1.43.3, not .4 as I anticipated. Did it reflash successfully? (I don't remember what version I had previously flashed.)

As Electroguard suggested might be the case for some, summer has gotten in the way of Annex play: vacation, guests, gardening, hammock. Annex remains my go-to device for controlling things about the house, and I have several projects brewing: monitoring a small solar panel, monitoring battery backup of my water pump and boiler in case of electrical outage.

Wifi access for monitoring and program updating remains the make-or-break feature for me for choosing a device, basic is my preferred language, and so Annex is the winner for those capabilities. Thanks again.
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1269 times
Contact:

Re: New multi version to test 1.43.4

Post by cicciocb »

Flashing reported success, but in the Editor, it says version 1.43.3, not .4 as I anticipated. Did it reflash successfully? (I don't remember what version I had previously flashed.)
The esp8266 version included is the 1.43.3, sorry for the misunderstanding :roll:
Post Reply