New AnnexToolKit 1.1 including release 1.48.22

Here you'll find the updated available
Post Reply
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1271 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sun Nov 27, 2022 10:55 am
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Sun Nov 27, 2022 10:30 am Francesco, if you are going to update the binaries, I would like to take this opportunity to tell you about a problem that I have detected.
The Internet radio program, TTGO T-Display ESP32 with PCM5102 and Annex 1.47.2, which I published in:
[Local Link Removed for Guests]
When I load version 1.48.22 it works, but with terrible audio distortion (not glitches, just audio problems), which makes it unusable.
And in the Youtube video that I posted, they already start asking for information about how to flash the module.
https://www.youtube.com/watch?v=RXvKQKpZAR4
I will recommend you to only use version 47, but for newcomers it can be somewhat confusing.
Hi Fernando
I can confirm this. There seems to be a lot of distortion on an external I2S DAC when the volume is set to more than around 50%
Ok, I found the problem and fixed it.
will be in next release
User avatar
Electroguard
Posts: 836
Joined: Mon Feb 08, 2021 6:22 pm
Has thanked: 268 times
Been thanked: 317 times

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by Electroguard »

Not a real advantage, people are supposed to use win 11 rather than win 7
It's not an advantage for those who are already using an updated windows on appropriate hardware, but for anyone using other systems on lower spec hardware it allows temporarily booting an old out-of-date windows safely offline.
User avatar
PeterN
Posts: 366
Joined: Mon Feb 08, 2021 7:56 pm
Location: Krefeld, Germany
Has thanked: 171 times
Been thanked: 203 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by PeterN »

There seems to be an issue with Wifi.scan in Annex32 v 1.48.22 with or without BLE
It doesn't give a constant report of the currently available WIFI-Networks.
Same snippet works on same hardware with Annex32 V1.43.x
My test code was

Code: [Local Link Removed for Guests]

while 1 = 1
  wlog  time$;"-------------------------"
  WIFI.SCAN
  While WIFI.NETWORKS(A$) = -1
  Wend
  wlog a$, chr$(13)
  pause 1000
wend
Can someone please test this as well? Thanks
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1271 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Dec 01, 2022 4:18 pm There seems to be an issue with Wifi.scan in Annex32 v 1.48.22 with or without BLE
It doesn't give a constant report of the currently available WIFI-Networks.
Same snippet works on same hardware with Annex32 V1.43.x
My test code was

Code: [Local Link Removed for Guests]

while 1 = 1
  wlog  time$;"-------------------------"
  WIFI.SCAN
  While WIFI.NETWORKS(A$) = -1
  Wend
  wlog a$, chr$(13)
  pause 1000
wend
Can someone please test this as well? Thanks
What is exactly the issue?
I'm trying actually and it seems to works

edit
I can reproduce this issue with the ESP32-C3, the list is always empty
User avatar
PeterN
Posts: 366
Joined: Mon Feb 08, 2021 7:56 pm
Location: Krefeld, Germany
Has thanked: 171 times
Been thanked: 203 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by PeterN »

Hi Francesco

it shows a very irregular behavior. From time to time it doesn't return any WIFi-AP and displays the time marks only.
Very random, no pattern or dependancy to see.
User avatar
PeterN
Posts: 366
Joined: Mon Feb 08, 2021 7:56 pm
Location: Krefeld, Germany
Has thanked: 171 times
Been thanked: 203 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by PeterN »

Code: [Local Link Removed for Guests]

18:53:49-------------------------
    
18:53:56-------------------------
NELAN1_2.4GHz,8C:19:B5:C7:CA:EE,-51,1
FRITZ!Box 7362 SL,C8:0E:14:ED:2B:6F,-71,11
NELAN2_2.4GHz,E0:28:6D:AF:F7:20,-74,11
IES-WLAN,3C:37:12:57:34:02,-81,7
WLAN-577961,00:0E:8F:4E:A1:F3,-83,1
IES-WLAN,B0:F2:08:70:7C:48,-89,7
WLAN-322341,4C:1B:86:23:17:5E,-92,1
UPC247837098,BC:8C:CD:A6:22:18,-94,11
Vodafone-8FAC,8C:6A:8D:92:8F:B0,-96,11
L,18:82:8C:9B:8A:DC,-97,11    
18:54:00-------------------------
NELAN1_2.4GHz,8C:19:B5:C7:CA:EE,-51,1
FRITZ!Box 7362 SL,C8:0E:14:ED:2B:6F,-72,11
NELAN2_2.4GHz,E0:28:6D:AF:F7:20,-74,11
LK Krefeld,68:D7:9A:84:EC:FF,-76,6
JBL Bar 5.1_4726.l025,FA:8F:CA:9B:D3:B2,-78,11
IES-WLAN,3C:37:12:57:34:02,-82,7
WLAN-577961,00:0E:8F:4E:A1:F3,-84,1
WLAN-11DA39,A4:CE:DA:54:93:FE,-87,6
IES-WLAN,B0:F2:08:70:7C:48,-89,7
WLAN-769625,EC:6C:9A:81:73:22,-90,6
HiSmart-01-ca2c4faded16,CA:2C:4F:AD:ED:16,-92,3
Breff,2C:3A:FD:97:1E:5C,-93,11
free WiFi by net365,86:2A:A8:0B:D8:1A,-94,6
UPC247837098,BC:8C:CD:A6:22:18,-94,11    
18:54:05-------------------------
    
18:54:12-------------------------
User avatar
PeterN
Posts: 366
Joined: Mon Feb 08, 2021 7:56 pm
Location: Krefeld, Germany
Has thanked: 171 times
Been thanked: 203 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by PeterN »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Dec 01, 2022 5:41 pm
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Dec 01, 2022 4:18 pm

edit
I can reproduce this issue with the ESP32-C3, the list is always empty
I tested with ATOM ECHO and NodeMCU
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1271 times
Contact:

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by cicciocb »

It seems that something changed in the scan mechanism.

This code works :

Code: [Local Link Removed for Guests]

while 1 = 1
  wlog  time$;"-------------------------"
  WIFI.SCAN
  While WIFI.NETWORKS(A$) < 0
  Wend
  wlog a$, chr$(13)
  pause 1000
wend
It looks that WIFI.NETWORKS(A$) gives -2 at the end of the scan (meaning : -2 if scan not triggered) and then gives the good result.

Simply considering -2 as a "non terminated" scan solves the problem
Stuart
Posts: 126
Joined: Fri Feb 19, 2021 7:46 pm
Has thanked: 5 times
Been thanked: 20 times

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by Stuart »

Just spotted the error in the port number. I should read what I cut and paste. Working now
Palm Liu
Posts: 41
Joined: Fri Jun 25, 2021 3:50 am
Has thanked: 10 times
Been thanked: 17 times

Re: New AnnexToolKit 1.1 including release 1.48.22

Post by Palm Liu »

Try AnnexToolkit 1.1 on ESP32C3 board, device keep reboot after flashing...
2.png
1.png
You do not have the required permissions to view the files attached to this post.
Post Reply