ESP32 S2 Bootet Annex nicht
-
- Posts: 18
- Joined: Sun Aug 15, 2021 5:23 pm
- Has thanked: 4 times
- Been thanked: 1 time
Re: ESP32 S2 Bootet Annex nicht
Hallo, anbei Bilder
You do not have the required permissions to view the files attached to this post.
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: ESP32 S2 Bootet Annex nicht
I have several of these modules and they work with Annex32-S2 USB.
I did a little project for christmas with one of these modules
[Local Link Removed for Guests]
You can flash using Annextoolkit 1.1 with this little procedure
Hold the "0" button, then press "RST"; you should hear, in windows, the sound confirming that a new USB device has been found
Use my Online Terminal Emulator available here [Local Link Removed for Guests]
clck on "Connect"
you should find the module identified as ESP32-S2 (in my case COM19) Important : Do not select the port otherwise the serial port will be blocked by the browser and unavailable for the AnnexToolkit
then, in the AnnexToolkit, select the USB32-S2 USB version and the right serial port Now, continue to hold the "0" button on the module and click on "Flash Firmware Only"
The flash process will start ; you should hear the windows sound informing that the module is disconnecting and reconnecting Ignore the message "Flash not completed"
Stop to hold the button "0" and reset the module pressing on the button "RST"
Now, go back in the Online Terminal Emulator, click on "Connect"
You'll notice that now the port is named "TinyUSB CDC" Click on it then on "Connect"
Now reset again the module pressing on the button "RST"
You should see now that the module is working I suggest to always use the online terminal for these modules
I did a little project for christmas with one of these modules
[Local Link Removed for Guests]
You can flash using Annextoolkit 1.1 with this little procedure
Hold the "0" button, then press "RST"; you should hear, in windows, the sound confirming that a new USB device has been found
Use my Online Terminal Emulator available here [Local Link Removed for Guests]
clck on "Connect"
you should find the module identified as ESP32-S2 (in my case COM19) Important : Do not select the port otherwise the serial port will be blocked by the browser and unavailable for the AnnexToolkit
then, in the AnnexToolkit, select the USB32-S2 USB version and the right serial port Now, continue to hold the "0" button on the module and click on "Flash Firmware Only"
The flash process will start ; you should hear the windows sound informing that the module is disconnecting and reconnecting Ignore the message "Flash not completed"
Stop to hold the button "0" and reset the module pressing on the button "RST"
Now, go back in the Online Terminal Emulator, click on "Connect"
You'll notice that now the port is named "TinyUSB CDC" Click on it then on "Connect"
Now reset again the module pressing on the button "RST"
You should see now that the module is working I suggest to always use the online terminal for these modules
You do not have the required permissions to view the files attached to this post.
-
- Posts: 18
- Joined: Sun Aug 15, 2021 5:23 pm
- Has thanked: 4 times
- Been thanked: 1 time
Re: ESP32 S2 Bootet Annex nicht
Hallo,
wo kann ich die Annex 1.50.5.bin finden.
Mit 1.48 und 1.49 bekomme ich diese Meldungen aus dem Terminal.
wo kann ich die Annex 1.50.5.bin finden.
Mit 1.48 und 1.49 bekomme ich diese Meldungen aus dem Terminal.
You do not have the required permissions to view the files attached to this post.
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: ESP32 S2 Bootet Annex nicht
the version 1.50.5 is not yet available.
It looks that your module is working
It looks that your module is working
-
- Posts: 18
- Joined: Sun Aug 15, 2021 5:23 pm
- Has thanked: 4 times
- Been thanked: 1 time
Re: ESP32 S2 Bootet Annex nicht
Bei beiden Versionen ist kein Accespoint verfügbar weder auf dem Handy noch auf dem Laptop.
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
Re: ESP32 S2 Bootet Annex nicht
Try this version and let me know
You do not have the required permissions to view the files attached to this post.
-
- Posts: 18
- Joined: Sun Aug 15, 2021 5:23 pm
- Has thanked: 4 times
- Been thanked: 1 time
- cicciocb
- Site Admin
- Posts: 1979
- Joined: Mon Feb 03, 2020 1:15 pm
- Location: Toulouse
- Has thanked: 425 times
- Been thanked: 1320 times
- Contact:
-
- Posts: 18
- Joined: Sun Aug 15, 2021 5:23 pm
- Has thanked: 4 times
- Been thanked: 1 time