Multitasking ?

Code tips and tricks for beginners
BeanieBots
Posts: 325
Joined: Tue Jun 21, 2022 2:17 pm
Location: South coast UK
Has thanked: 173 times
Been thanked: 104 times

Re: Multitasking ?

Post by BeanieBots »

Much appreciated. Thanks.
Stuart
Posts: 126
Joined: Fri Feb 19, 2021 7:46 pm
Has thanked: 5 times
Been thanked: 20 times

Re: Multitasking ?

Post by Stuart »

I have finally started using this new version of tempr$, which is excellent and allows much better updating. The routine is called once every three seconds, which is ample time for the conversions, and it is all non-blocking. I use the sensor id string to distinguish between them, e.g this is in the setup:

Code: [Local Link Removed for Guests]

ext_sensor_id$     = "28db49ec00000063"
hw_sensor_id$      = "28883c18291901ce"
ch_sensor_id$      = "288978c400000006"
ret_sensor_id$     = "289764c400000013"
temp_pin           = 13 'all sensors on this pin
ret$ = tempr$(temp_pin,0) 'request all readings
the disp_temp lines are a sub that writes to a tft display. To get the sensor id strings use tempr$(temp_pin), list the result and copy it into your code.

Code: [Local Link Removed for Guests]

'===========
read_temps:
'===========
 'read and display each temperature
   local_ext_temp   = val(tempr$(temp_pin,ext_sensor_id$))
   flow_temp = val(tempr$(temp_pin,ch_sensor_id$) )
   disp_temp c4,r3,flow_temp  
   ret_temp  = val(tempr$(temp_pin,ret_sensor_id$))
   disp_temp c4,r4,ret_temp 
   hw_temp   = val(tempr$(temp_pin,hw_sensor_id$) )
   disp_temp c4,r2,hw_temp
'ask for the next time
ret$ = tempr$(temp_pin,0) 'request all readings, also once in startup
return
michaelvrba72
Posts: 1
Joined: Sat Mar 02, 2024 1:32 am
Has thanked: 3 times

Re: Multitasking ?

Post by michaelvrba72 »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Mon Jan 30, 2023 10:23 am
[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Fri Jan 27, 2023 5:30 pm Any chance we might see it for 8266 as well?
I'll try to include the changes also in the ESP8266
How was the implementation in 8266? That's what I'm struggling with here, and asynchronous mode would be a good solution, which unfortunately isn't available yet.
Post Reply