Will Annex32 run on this Pico form factor ESP32 board?

Annex for ESP32
Post Reply
lyizb
Posts: 93
Joined: Fri Feb 12, 2021 8:23 pm
Has thanked: 37 times
Been thanked: 23 times

Will Annex32 run on this Pico form factor ESP32 board?

Post by lyizb »

User avatar
cicciocb
Site Admin
Posts: 1899
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1269 times
Contact:

Re: Will Annex32 run on this Pico form factor ESP32 board?

Post by cicciocb »

Hi Lizby,
the ESP32-S3 is another chip with a different architecture so the actual annex32 firmware do not runs on it.
However, I implemented the support for this chip as well as for the other chips of the family but I miss the time to finish.
At the same time, the toolkit must be modified as the upload process is different for each chip.

However, the board that you propose do not have enough flash (only 2mb), at least 4mb are required.
lyizb
Posts: 93
Joined: Fri Feb 12, 2021 8:23 pm
Has thanked: 37 times
Been thanked: 23 times

Re: Will Annex32 run on this Pico form factor ESP32 board?

Post by lyizb »

Thanks--I feared it was short of the necessary flash. Wanted to check before purchasing.
Post Reply