Request for some help

Place where find documentation
Post Reply
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1269 times
Contact:

Request for some help

Post by cicciocb »

Hi all,
I'm actually trying to release another version of the toolkit that will support 5 versions of annex :

Annex for exp8266
Annex for ESP32
Annex for ESP32 without BLE
Annex for ESPCAM
Annex for EPAPER

For each of these versions I would like to include a batch of example files tested and adapted for each version.
All shall be available in -full and -min version.

The idea is to include the following files :
esp8266-data-full.zip
esp8266-data-min.zip

esp32-data-full.zip (for both ESP32 versions (with or without BLE)
esp32-data-min.zip (for both ESP32 versions (with or without BLE)

espcam-data-full.zip
espcam-data-min.zip

epaper-data-full.zip
epaper-data-min.zip

So, I'm looking for some help to create, test and configure these files.
I already created a list of examples that are actually included into the toolkit but many of them should be tested / updated and selected depending on the version.

We could even create a full list of examples on GITHUB where everyone could send proposal and comments

So, please, if any volunteer is available let me know by raising your hand :D

Thanks

cicciocb
User avatar
PeterN
Posts: 366
Joined: Mon Feb 08, 2021 7:56 pm
Location: Krefeld, Germany
Has thanked: 171 times
Been thanked: 203 times
Contact:

Re: Request for some help

Post by PeterN »

This is a raised hand :-)

Can offer help especially with ANNEXCam on ESP32CAM and M5CAM

Peter
barneyb
Posts: 15
Joined: Sat Jun 12, 2021 7:00 am
Has thanked: 8 times
Been thanked: 2 times

Re: Request for some help

Post by barneyb »

raises hand, i can help with esp-01 and 4m nodemcu v3
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1269 times
Contact:

Re: Request for some help

Post by cicciocb »

Thanks PeterN and barneyb,
I'll send you the batch of demo files I have currently.
These includes also support for external devices (such as GUI for the TFT, sensors, etc)
User avatar
dMajo
Posts: 5
Joined: Thu Apr 08, 2021 5:42 pm
Has thanked: 2 times

Re: Request for some help

Post by dMajo »

I can help ... but right now the only HW I have at hand is https://www.olimex.com/Products/IoT/ESP ... e-hardware
I should receive by the end of july some traditional ESP32 boards
Annex WiFi RDS [Local Link Removed for Guests]
[Local Link Removed for Guests] [Local Link Removed for Guests]
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1269 times
Contact:

Re: Request for some help

Post by cicciocb »

[Local Link Removed for Guests] wrote: [Local Link Removed for Guests]Thu Jul 01, 2021 10:13 am I can help ... but right now the only HW I have at hand is https://www.olimex.com/Products/IoT/ESP ... e-hardware
I should receive by the end of july some traditional ESP32 boards
Thanks you very much,
I'll send the files to you too
PANNO2
Posts: 51
Joined: Tue Jun 08, 2021 6:26 pm
Has thanked: 47 times
Been thanked: 3 times

Re: Request for some help

Post by PANNO2 »

maybe i can help also a little bit.
User avatar
cicciocb
Site Admin
Posts: 1900
Joined: Mon Feb 03, 2020 1:15 pm
Location: Toulouse
Has thanked: 407 times
Been thanked: 1269 times
Contact:

Re: Request for some help

Post by cicciocb »

Thanks to all,
I'm still in the process to clean all the examples I have to remove redundant or personal information.

I'll share all the batch with you all.
Post Reply